Kannan Tools and Dies

Innovative Aerospace Components:

Kannan Tools and Dies is at the forefront of manufacturing precision machined components and sub-assemblies for the aerospace and space technology industries. Our dedication to quality and precision ensures that our products meet the stringent requirements of these advanced fields. We provide essential components that contribute to the success and safety of aerospace missions, from aircraft to space exploration vehicles, and are committed to driving innovation and excellence in every product we deliver.

COMPRESSOR DISC FOR 5thSTAGE

Material –inconel-718

B1 OUTER SHELL ASSEMBLY

Material –Titanium

COMPONENT DEVELOPED FOR AEROSPACE & SPACE TECHNOLOGY

Aero Dome

Rm :- 15CDV6

Specialty:- Profile Accuracy 20μm

Aero Dome

Rm :- 15CDV6

Specialty:- Profile Accuracy 20μm

Aero Bottom

Rm :- Ti-6Al-4V

Specialty:- Profile Accuracy 20μm

Helium Tank

Rm :- Ti-6Al-4V

Specialty:- OD Ø400mm 2mm Wall Thick,Pressure Test @ 600 Bar pressure

Aero Dome

Rm :- Ti-6Al-4V

Specialty:- Profile Accuracy 20μm

Cylinder Head

Rm :- Special Proprietary Material

Specialty:- Fully machined from Bar stock, ⦾ 20μm between Top and Bottom bore.

Cylinder Head

Rm :- Special Proprietary Material

Specialty:- Fully machined from Bar stock, ⦾ 20μm between Top and Bottom bore.

Jet Vane Bracket

Rm :- Ti-6Al-4V

Specialty:- :- Fully machined from Bar stock

UDMH FRONT FLANGE

Rm :- 7075 T352/51

Specialty:- Machined from Bar stock Ø400 x 180mm

STATOR

Rm :- Z30C13 (Aviation and Aero Steel)

Specialty:- 80 Vanes Ø365x20mm

FIRST TURBINE ROTOR

Rm :- Z30C13 (Aviation and Aero Steel)

Specialty:- 80 Vanes, True position ⌖ 0.3 max Ø360x20mm.

SECOND TURBINE ROTOR

Rm :- Z30C13 (Aviation and Aero Steel)

Specialty:- 80 Vanes, True position ⌖0.3 max Ø360x20mm.

N2O4 REAR FLANGE

Rm :- 7075 T352/51

Specialty:- Fully machined from Bar stock, Ø420x90mm ⦾ 20μm between two bore.

BODY

Rm :- 7075 T352/51

Specialty:- Fully machined from Bar stock,Ø258x352, ⦾ 20μm between two bore

SKIRT UDMH

Rm :- 7075 T352/51

Specialty:- Fully machined from Bar stock,Ø250x202, 3mm Wall Thick.

SKIRT N204

Rm :- 7075 T352/51

Specialty:- Fully machined from Bar stock,Ø250x282,3mm Wall Thick.

BODY N204

Rm :- 7075 T352/51

Specialty:- Fully machined from Bar stock,Ø258x352, ⦾ 20μm between two bore

REAR FLANGE UH-25

Rm :- 7075 T352/51

Specialty:- Cylindricity 0.20μm

FRONT COVER N2O4

Rm :- 7075 T352/51

Specialty:- Ø420x100 Cylindricity 0.20μm

BODY N204

Rm :- 7075 T352/51

Specialty:- Fully machined from Bar stock,Ø340x310

BRACKET

Rm :- 7075 T352/51

Specialty:- Fully machined from Bar stock, 250x210x200

SECONDARY SHAFT

Rm :- Z30C13 (Aviation and Aero Steel)

Specialty:- Ra0.2, ⦾ 10μm. Ø36x305mm

PRINCIPAL SHAFT

Rm :- Z30C13 (Aviation and Aero Steel)

Specialty:- Ra0.2, ⦾10μm. Ø112x660mm

SECONDARY ROLL SUPPORT WELDMENT

Rm :- 13-8PH

Specialty:- Total Run Out 10μm, ⦾ 10μm. Ø168x320mm, Angularity 30μm, Angle 13°± 0.01°

Model Support Sting

Rm :- 17-4 PH

Specialty:- Total Run Out 10μm, ⦾ 10μm. Ø36x600mm, Angularity 30μm, Angle 10°± 0.01°

CONNECTOR SHUTTER HINGE

Rm :- ALUMINIUM EXTRUSION

Specialty:- Machined From Bar stock 170x160x3mm Wall thick

BRACKET F-4

Rm :-MDN 250 A

Specialty:- Machined From Bar stock 270x201x91

BRACKET-R-1

Rm :-MDN 250 A

Specialty:- Machined From Bar stock 402x152x42

BRACKET F-1

Rm :-MDN 250 A

Specialty:- Machined From Bar stock 300X172X108

ROD-6

Rm :- 15-5PH STEEL

Specialty:- Machined From Bar stock M27x5-7e Trapezoidal metric thread for 134mm length

BRACKET F-4

Rm :-MDN 250 A

Specialty:- Machined From Bar stock 110x72x70.

FLANGE

Rm :- Special Alloys

Specialty:- Machined From Bar stock 170x160x30mm

CONNECTOR SHUTTER HINGE

Rm :- ALUMINIUM EXTRUSION

Specialty:- Machined From Bar stock 100x100x50mm

LOCK-2

Rm :-MDN 250 A

Specialty:- Machined From Bar stock 68x64x30 ⦾ 20μm between two pinch

COVER

Rm :-Aluminum

Specialty:- Machined From Bar stock 60x50x30

FLANGE

Rm :-Supper alloy

Specialty:- Machined From Bar stock 80x60x70

FLANGE

Rm :-Aluminum alloy

Specialty:- Machined From Bar stock

Mechanical Seal Sleeve

Rm :-SS 316L

Specialty:- Machined From Bar stock 220x200x250, 16 Start Helix

ROCKER ARM HOUSING

Rm :-Ti-6Al-4V

Specialty:- Machined From Bar stock Spline ID & OD

ROCKER ARM HOUSING

Rm :-Ti-6Al-4V

Specialty:- Machined From Bar stock Spline ID & OD

Rocker Arm

Rm :- Ti-6Al-4V

Specialty:- :- Fully machined from Bar stock

Material :- H13 & HTSHRC:- 40-45

ACTUATOR COMPONENTS

Rm :- AL6061

Specialty:- Machined from Bar stock,Black Anodizing

Die Components

Rm :- AL6061

Specialty:- Machined from Bar stock,

REFLECTOR HOLDER

Rm :- AL6061

Specialty:- Machined from Bar stock, 2mm Wall thick Allover area, Flatness 0.02.

SIDE FAIRING-1

Rm :-ALUMINIUM EXTRUSION AA2219

Specialty:- Machined From Bar stock 400x300x63

Mandrel Solid Propellant Rocket Motor

Rm :-ALUMINIUM EXTRUSION AA2219

Specialty:- Machined From Bar stock 700x400x400

Mandrel Solid Propellant Rocket Motor

Rm :-ALUMINIUM EXTRUSION AA2219

Specialty:- Machined From Bar stock 700x400x400

Pinion Housing Used in Nuclear Reactor

Rm :-MDN 321

Specialty:- Machined From Bar stock

Flyer

Rm :-ALUMINIUM EXTRUSION AA2219

Specialty:- Machined From Bar stock 110x110x100

Flyer

Rm :-ALUMINIUM EXTRUSION AA2219

Specialty:- Machined From Bar stock 110x110x100

Flange Used in Nuclear Reactor

Rm :-MDN 321

Specialty:- Machined From Bar stock